Epoxy structural adhesives

Pliogrip 5000A/5020B:   A 1.7:1 ratio (by volume) toughened epoxy adhesive formulated for ambient-cure or heat-cure bonding of SMC and metals.    Work time is 130 minutes at 74ºF (23ºC).    Achieves green strength in 2 minutes in a heated fixture delivering 300ºF/300ºF (149ºC/149ºC).    Bulk only.  More...
Pliogrip 5500/5560:   A 2:1 ratio (by volume) toughened epoxy adhesive formulated for powder-primer compatibility and for very-fast cycle times in SMC bonding using heated fixtures.   In a heated fixture at 260ºF (126ºC), 5500/5560 develops green strength in 60 seconds.     Work time is 60 minutes at 74ºF (23ºC).    Elongation is 8%.   Bulk only.    More...
Pliogrip 5500/5590:   A 2:1 ratio (by volume) toughened epoxy adhesive formulated for powder-primer compatibility and for very-fast cycle times in SMC bonding using heated fixtures.   In a heated fixture at 260ºF (126ºC), 5500/5590 develops green strength in 90 seconds.     Work time is 75 minutes at 74ºF (23ºC).    Bulk only.   More...
Pliogrip 5761B (5401B/5461):   A 2:1 ratio (by volume) toughened epoxy adhesive formulated for bare-metal bonding and for ease-of-dispense from cartridges.   Bonds steel, SMC, aluminum, and other materials.   Work time - 90 minutes; clamp time - 4 hours at 74ºF/23ºC but may be accelerated with heat.   Contains .010 inch (0.25mm) diameter glass beads for bondline control.    Cartridge. More...
Pliogrip Panel 60:   A 2:1 ratio (by volume) toughened epoxy adhesive formulated for bare-metal bonding and for ease-of-dispense from cartridges.  Meets the GM6449G General Motors aftermarket metal bonding specification on cold-rolled steel.     Bonds steel, SMC, aluminum, and other materials.  Work time - 60 minutes; clamp time - 4 hours at 74ºF/23ºC but may be accelerated with heat.   Panel 60 contains .010 inch (0.25mm) glass beads for bondline control.    Cartridge